If only Toyota provided 1 page on the HU for displaying OBDII data

No, on aftermarket HU. Fusion is installed on HU with Veepeak BT adapter.
Before, I ran Fusion on my phone.

 

That looks pretty darn good! From your earlier post and some subsequent reading I did, it's looking to be problematic.

 

I'm sure.
But you can use phone to monitor all vitals with Fusion app in meantime.

 

Nice, I see -2.6 on your feedback. I definitely think my ecu still has some learning to do. I’m at -3.0 / 29.6 on the correction learn vs your 21.6. Are you tuned?

 

Yes, this one is tuned.
this 87 octane under 94% engine load

-3 /29 are great numbers for that engine load/octane

 

WOT run today for a little run, it’s interesting to see how high IAT’s affect knock. When they reach 116°F you get a bit more feedback.

 

Which fuel is it?

 

93 octane, timing peaked closer to 26 degrees at redline but the polling on the data logging is slow.

 

FWIW - I used AAAD (Github) to install AA Performance, which supposedly will take the data from Torque Pro, and put it up on the AA screen. Well, I am getting gauges on the screen, but jumping through the hoops to get AAAD installed then AA Performance has been a PITA to be honest.

In addition AA Performance wants to disconnect if you place the vehicle in reverse, or if you switch away to one of the other apps running like Google Maps or Spotify. In other words, it probably needs to be reworked.

I might try a mirroring application to mirror the entirety of the phone's screen to see if it is more compatible with the AA that is out now.

However, these solutions are not as good as the OBD2 display I purchased off AliExpress. That product would be super great with just a little tweaking.

There's often no free lunch in what should otherwise be straight-forward.