What Have You Done To Your 3rd Gen Today?

Dang

 

There’s only 2 zerks and they’re both on the front driveshaft for 2018+ rear DS is sealed.

 

May remove the transmission skid to look for those as I suspect the skid is hiding one or both. Too tired now.

My 1/2 breaker bar (12 in? 18 in?) was necessary for the filter canister removal and removal of the canister-drain plate. Spent too much time putzing changing sockets or just being slightly fearful of not breaking an oil containment part. But the Fumoto valve is in so engine skid can go back on (no splash on it), new filter and seals are in, 6 quarts of oil are in. Have a 7th quart to top off last 0.2 quarts but oil shows 3/4 between the two bumps on the dipstick so will let the oil circulate instead of overfill.

13 inches of room (9.5 plus my 4 in mini-stands) still is not much fun.

 

Thanks! Great advise!

 

I saw that as well and thought the same thing!

 

Looks like a nice clean job
Like they say measure twice and cut once

 

I'm newer to Tacomas so which model years/trim levels came with reds guts? I'm thinking that would look pretty good in my truck.

 

SR5 models and maybe SR? I know it started in the 2016. I think it also only came in certain colors. some had a tan / orange

 

Yeah I’m pretty sure just sr5

 

Roll through at 18 mph and watch SWAT pull up

 

good idea

 

Lol!

 

What size rotor is that?

This is a 340mm, looks a little bigger.

 

Disneyland's parking structure has a speed limit of 14MPH. I'm assuming they use these random numbers so people actually think about it and hopefully drive the listed speed.

 

Spec on those TE's? Or the part #

Thanks

 

https://runnin4tacos.com/products/te37xt-volk-racing

 

Thanks! 8.5 wide at -10mm must poke out a good bit.

 

The wheels themselves sit about perfectly flush with the fenders. The tires poke though

 

I really wish they made those Volks in more offsets so running 35's wasn't such a PITA. 4.36" backspacing is a little much for a decent fit.

 

not sure exact size. It’s the rear fj rotor. Stoptech brakes are legit. Your brake and wheel combo looks good!