Need help searching for a rust free bed.

Desperately looking for a rust free bed for my '97 Tacoma. The bed I have is repairable but I don't have the skills/know-how to weld patch panels.
Both sides have rust but the passenger side is the worst.
Would anyone know where I could get a rust free bed?
Or if anyone knows of a shop that could fix it in the Colorado Springs area and surrounding?
If anyone has a bed. Color doesn't matter, prefer without fender flairs because that is what caused the rust on my current bed.
Bedsides would work too.

 

Try posting in the local Colorado forums: https://www.tacomaworld.com/forums/colorado.172/

Also search through the B/S/T on here, might have to travel

 

I will do that!

 

Could you send me the link to the part outs you found. I only found one in Wheat Ridge.

 

Deleted my post. Upon looking at the adds, it seems like sellers from outside your area are posting trucks in your area that are being parted out. Still, Craigslist is a good resource for parts, sorry for the false lead and best of luck in your search.

 

OP, I'd look for pick and pull junkyards. Some have online vehicle inventories, so you can see if they have any Tacomas before going. The beds from any first-gen 5-lug or 6-lug should work. Helped a buddy find a new bed for his '99 (6-lug 4wd) last summer from the local pick and pull (came from a 2000 5-lug). Only cost $200 and had it pulled in about 20 min. Fit like a glove on his truck too.

 

Come to California. You'll find them at every junkyard.

 

Check out these guys on Facebook.

 

It was kind of mentioned earlier, but I searched car-part.com and found a rust free bed not too far from me at a junker, and then made a road trip out of it. 6bolts for the bed, and a couple for the gas filler neck. It was stupid easy to swap