Spacer lift

I just installed a rough country 3 inch spacer lift in my 2020 sr tacoma. After installing my dash says pre collision system malfunction see dealer. Also abs light is on which may be my fault I did stretch on the wiring for that getting the strut back in. My traction control also does not work now light is also on the dash. Pushing the button does not seem to change it on or off. Any help would be appreciated. Thank you.

 

The pre collision stuff is because of the lift it may need to be recalibrated not sure how people have been doing it.

The rest is because of the wire being stretched, the wires are very thin and easy to pull apart.

Welcome to TW by the way.

 

Thank you for your input, I assumed the abs wires got stretched by me during installation. Didn't understand about traction control, and the pre collision. Guess I got some digging to do.

 

I believe lots have had the same issues with that grill sensor after lifts and grill swaps.
Should be lots of posts about it.
Or maybe google would be easier.

If mine gets dirty or snow on it, it shuts off.