ECM removal 2.7 liter

I can't find any info about how to properly remove the ECM.

I have a PO335 code on my OBD2 reader and have gone thru all the checks and the problem is either the crankshaft timing pulley teeth are off (which I don't have the gear to do) or the ECM.

I want to pull the ECM and take it to a shop to get it tested since that seems like the cheaper and easier test.

Any guidance/resources would be appreciated.

 

PCM is behind the glovebox near the right kick panel bolted to a bracket, pretty easy to remove just a couple 10mm bolts.

 

I didn't realize it was also called the Powertrain Control Module.

That helped me find info in the Haines manual about that...there was nothing about the ECM

Thanks