Wheel spacers and extras - prices dropped

$148 Spidertrax WHS007 Blue Wheel Spacer Kit

Spidertrax WHS007 spacer set - $180 shipped
Ran for about 1000 miles off and on while I got the right tire/wheel combo to clear the UCAs. Always cleaned the hubs before install, always torqued per instructions. Never had to pry them off and they're in great shape. Comes with original boxes and a tube of the thread locker. One of the boxes got wet during a hard rain but still serviceable.







OEM fog housings - $30 shipped
Taken off at 20k miles to replace with SS3s. Good condition, a little dirt from the trails.



Warn winch hook and thimble - $25 shipped Replaced as soon as the winch was installed.
OR tow hook sold



Trail Gear U-bolts - free to good home, I'll toss them in with something larger.
I cut them down to match the AP springs but ended up going with a 3 degree shim, so had to get longer bolts. They've got about 4k miles on them, tightened to 85 ft lb. I hate to toss them in the trash.




Plasticolor 4wd mud flaps sold



Rago Fab rear shock skids for a 3rd gen - $60 shipped
Modified one to fit the 2nd gen shock mount and saw the bolt and washer were contacting the skid at only one point. Was going to machine an angled washer but threw these in the "do it later" pile. I can cut the other one to fit if needed for a few bucks extra. Otherwise, the washer covers the small cut out I made.

 

Free bump, spacers will work on a 3rd gen?

 

Spacers work great on a 3rd gen. Spidertrax and Bora are two quality hub-centric options for our trucks. Here they are pushing the stock wheels out to about flush: