Tire size to go with?

Added the Body Armor Pro bumpers and then added Eibach Stage 2 shocks with 2.5” lift in front and 1” blocks on the rear. Looking for advice on tire sizes for my setup??

Thanks!

 

What size wheel will you be putting them on?

 

33”s would be big enough to not look tiny and you probably wouldn’t have to do anything to make them fit with 2.5” of lift up front.

 

SCS Blaze10: 17x8.5-10mm 6x139.7

 

Yeah I think 285’s or 295’s would look and preform good. 295’s would take some work. Anything bigger and you’ll have to do a lot of work to get the tires to fit.

 

I’m running 265/70r17s with a 2”/1”. Pop the front up 1/2” give or take with the weight of your front bumper. 285/70r17s would look good, but with your offset you’re probably looking at doing a cmc for rubbing.

 

Tried to upload a pic of my Taco's current config last night using my cell but no such luck.

 

255/85/16

 

It really depends on what look you want and what intentions you have for it.

I went straight from stock to 295/70/17 since I want to retain the spare.

Now I’m on 35. If I had to redo it all, I just go straight to the point. Save time and money.

 

Decided to go with SCS Blaze 10 8.5” -10 offset rims and 33” KO3s. Also using SPC upper control arms for the additional caster/camber adjustment.

 

35.

33's look like this:

 

Definitely would need CMC done before attempting 35s

 

I didn’t

 

Lookin' good. Makes me want some new wheels now.
The -10 deeper dish adds to the perception of wider stance, as well. No mudflaps, too. Vs. the stock +25's w/ 1.25" spacers.
Sitting at -7 but still looks much flatter with stock than yours(only 3mm difference). Those are 265/75r16's. 2.5"/1.5" lift

 

My Tacoma and V6 badges are stick on black plastic overlays I picked up on Amazon. wink wink