Bolt on sliders - DCSB and AC same frame / mounting holes?

Is the DCSB and AC on the same frame with all the same mounting holes?

I ask because I have access to a set of sliders that was built to mount to a DCSB, but I have an access cab, and I want to know if they will be able to bolt up to my truck the way they would to a DCSB?

 

Yes

2wd and 4wd have slightly different forward crossmembers, but if both trucks are the same configuration, it’ll be the same frame.

 

Thanks, Ghost Ship! I found the same info online but nothing definitive. Everything I know about it tells me the same, but wanted to confirm before I climb under the truck. I'm recovering from multiple surgeries and hoping to make the job straightforward.

 

At worst there might be some holes that you don’t use but depending on slider manufacturer, you should still have enough bolts to mount the sliders safely.

 

I have a aclb 2.4 4x4 and I cannot find bolt-ons that will fit the truck (it's because I have the 2.4, they say) I have contacted pretty much every builder and they all tell me I'm SOL.

I haven't tried in the last 6 months or so... Maybe it's time to start looking again.