Dobinsons 2nd Gen Tacoma Suspension Options

Yes we just put the 6" Readylift on it, going to pick it up this afternoon.

 

I haven’t had my ome 2.5” lift with medium springs long but it rides and looks mint

 

3 years and about 80k miles later my dobinson leaf springs are still holding their lift

 

I’ve had mine for around 6 years with 500lbs in the bed and 200 in the backseat. Still doing their job. When I do unload the bed, the back raises up about 1.5 inches. Can’t complain about their durability.

 

The leaf spring delivery just came in, so all 3 options are back in stock again.

L59-110-R
3+2 Leaves, Raised Height (55mm Lift, 2.1″), Medium Duty, Recommend 50 to 100KG (110-220lbs) constant load

L59-111-R
4+2 Leaves, Raised Height (55mm Lift, 2.1"), Heavy Duty, 280KG constant load
**Remove a leaf for light load/empty rear ends on these springs.

L59-112-R
5+2 Leaves, Raised Height (55mm Lift, 2.1"), Super Heavy Duty, 400-550KG constant load

 

If anyone ever has a problem adjusting or turning the purple or black adjuster knobs on their Dobinsons MRA shocks or struts, here's a guide to clear that up.
https://exitoffroad.com/wp-content/...ns-MRR-MRA-Adjuster-Stuck-or-Hard-to-Turn.pdf

 

Black Friday deals start tomorrow. Check out the post here for any and all deals we will be offering. We'll update it if any other brands add a deal.

https://exitoffroad.com/2023-black-friday-deals-discounts/

 

@Crikeymike - thanks for the huge amount of info you're sharing on Dobinson's stuff.

Question on the L59-111-R vs L59-110-R leaf springs - Gen2 TRD Off Road trim, I typically run most of the time as a daily driver with ~100kgs in the back "empty" (camper top and everyday gear) to 220-300kg loaded up for camping (fridge, water tanks, firewood, camping gear, kitchen sink).

Going with MRRs in either case but based on the info you shared earlier it seems like the L59-111-R leafs are the way to go? Risk being a little harsh under light load but better suited for fully loaded needs? Terrain is mostly US desert forest roads, some dry river crossings, long stretches of washboard and whoops. No real rock crawling.

L59-110-R
3+2 Leaves, Raised Height (55mm Lift, 2.1″), Medium Duty, Recommend 50 to 100KG (110-220lbs) constant load

L59-111-R
4+2 Leaves, Raised Height (55mm Lift, 2.1"), Heavy Duty, 280KG constant load
**Remove a leaf for light load/empty rear ends on these springs.

 

Hey bud. Thanks for the compliment!!

Yeah, you can't really go wrong with the L59-111-R's, as you can remove a leaf if they're a bit too much for you. Better to have it and not need it, than need to beef up the other ones.

Is yours a short bed?

 

Cool. Yeah, short bed, 4-door, V6. Would've loved a long bed but they're like hen's teeth around here.

 

OK, cool. Yeah, if it was a long bed, you'd need the 111's for sure.

 

How have these CV boots been working out for people? Got a set of OEM CV's here, one has the tiniest pin hole in it, need to reboot both ends.

 

I sell them pretty much every day, they're super popular. But I never hear from the people afterwards, which tells me that everything must be good.

 

I bought some from him last October and they have been good so far. About 5,000 miles

 

This is really good info and kind of jarring to only get to near the bottom of a deep rabbit hole!

I'm looking to get the IMS or twin tube Dobs kit and the seller was suggesting the leaf pack but I run mostly empty and prioritize comfort on small bumps and expansion cracks over body roll. My understanding was that I could either go for blocks and keep a plush ride or have a jarring time on leaf springs that require weight to break into their stroke.

The idea of the blocks route felt odd (aren't we here for MORE suspension?) but I was leaning that way as I couldn't stomach the idea of telling my passengers the reason everything is shaking is because I wanted to run 33s.

If you're telling me there is a leaf pack that can achieve 2" of lift and still feel plush I'm in.

Also, my current leaf springs have had a rough life (10+yrs of use) but I'm wondering if with an AAL that actually plays into my favour? Does the support come early or late in the travel?

I'm looking for as progressive a feel as possible, where chunky gravel roads feel like air, regardless of the handling on bigger hits (which I slow down to a crawl for anyways). What springs would you suggest for a 2010 DCSB with max 3 mountainbikes and 3 humans?


Thanks for you wealth of expertise on the Dobs setups!

 

Sorry to say, I've never described any leaf spring as "plush". At least not on a Tacoma.

10+ year old leaf springs are going to be more flexible and softer in ride than a brand new set. To achieve the extra height you're after without adding firmness, the blocks is the way to go. Or don't lift it.

Lifting these trucks doesn't add room for tire clearance. It just changes the ride height in the suspension travel range. At full bump, when you bottom out, there's not more room in there with a lift than without it. It's a common misconception that you need to lift a truck to fit bigger tires on them. People just do it because it looks pretty funny to put bigger tires on without adding some sort of a lift. The lift is for added ground clearance.