Rigid industries TRD pro fogs

I have a set of take offs from a TRD pro that Im looking to add to my Trail edition. Im on the fence about pulling my steering wheel to add the stalk. Does anyone know what kind of connector is on the fogs and if there is an adapter available to a Deutsch connector. I might look at just running them off a regular switch for now

 

If I’m not mistaken, the wiring and connector are all there . All you need is the stalk and fogs

edit. NVM. Follow this V V .

 

Nitori's OEM SR Foglight mod!

 

Thanks, ive read through that Not installing with the stalk for now. I don't want to pull my own steering wheel and components at 7k miles and mess with warranty. Dealerships here suck and won't touch it because it didn't come that way.

 

So add an external switch...

 

That's the plan... That's why im asking if any one knows of an adapter

 

Search Deutsch connector on EBay...purchase the mating side to the fogs also, assemble and enjoy.

 

Do you know what type of connector is on the Toyota side? is it h11?

 

Yes H11

 

How come you don't just use the vehicle harness to connect to fog lamps and add the switch to the blue wire in the cab? Sell the harness.

 

My plan for the adapter was, since I have the harness coming (because I originally planned to use the stalk) I can use the oem h11 connectors and cut the other side and add a Deutsch connector and plug into my existing harness already in place I had for my ditch lights that are now removed. I honestly don't know about the blue wire, was that in the nitori thread?

 

Yes it was.
It's the wire that goes to the light stalk switch...

 

Pulling the wheel is not hard, check some videos out on you tube. I personally would use the stalk for a more factory look.