Bolt part number?

So far I've found everything through partsouq but this bolt has me stumped. It is a 19mm bolt (1 of 4) that attaches the rear bumper to the truck frame. (NOT the bumper to bracket bolts) See the bracket photo below.



Can anyone help with a part number for the attach bolt? I need one, 3 were reusable, one lost thread to rust and won't torque.

 

It might help to post a picture of the specific location you're referring to..

If you have the others, then use one of these:


And just order a bolt from McMaster Carr.

 

Here you go

 

If that's your truck, I'd just measure the other bolt and buy a replacement locally.

Super easy.

 

@ltdpilot, I have searched every 1st Gen Tacoma parts diagrams that I know of and I cannot find the diagram that shows the rear bumper breakdown. Its like it doesnt exist. I would do what other have suggested and remove one bolt and bring it to a hardware store to find a match. You could also try a local U-haul place, they may have similar bolts they use to install trailer hitches. Ill keep looking and let you know if I find it.

 

Hell, might even have a neighbor that has a tap and die set with gauges.

The gauge set it comes with has teeth to figure out the size and pitch of any bolt in either Metric or SAE. Has come in handy many times.

 

Weird, eh?

 

Yeah, it is. If you go to the Toyota online parts info it has everything for the front bumper breakdown but not for the rear. I even busted out my old hard drive with all of my old Tacoma info and I still cant find it. Im still looking, if I come up with anything Ill let you know.

 

Thanks, much appreciated

 

check here.
https://autoparts.toyota.com/products/product/insert-rr-bumper-ex-5215504010#popup-1://autoparts.toyota.com/products/product/insert-rr-bumper-ex-5215504010#popup-1

 

Most certain these are leftover from changing the bumper on my '01.
The one in middle is a 19mm. The new replacements are 17mm but the bolts 'appear' the same.
Sorry no #'s on them.
They're about 7/16"W 1.5"L

 

The middle one is definitely what I have. Thanks.

 

I just went and pulled one of mine. They are M12 x either 1.25 or 1.5 x 30mm with the captive washer. I say either 1.25 or 1.5, cause as it turns out the bolt I removed spun in the nut. So

https://www.mcmaster.com/products/s...ength-metric-class-8-8-steel-hex-head-screws/

 

Possibly these flange bolts.
https://www.toyotapartsdeal.com/oem/toyota~bolt-flange~90080-10064.html

 

Not sure if this info helps but the factory part number for the rear chrome bumper is

$609 00228-35981-13 Rear Bumper Face Bar

00228-35981-13. It comes as a complete assembly with all the brackets and hardware. That maybe why there is no information on the bolts.

 

Thank you!

 

Thanks to everyone

 

Did anyone find out what EXACTLY what the bolt (and nut) spec is for the bumper brackets ?

 

Take one out and measure it.