Diamondback security modification (idea)

It is possible for the exterior keyed lock handles for the interior cross locking bars to be pried open with a pry bar; where the locking pin is recessed, and then the handle rotated so the cover can be unlocked. That's not good when you're carrying sensitive equipment underneath.

Today I was looking at the bottom of the locking bar mechanism and noticed you can easily take a length of a wire tie and wrap it in such a manner, that the cam won't move to unlock the lock bars. Wire tie is easy to install/uninstall, and it temporarily prevents the outside luck handle from moving.

This will work on front and back latch mechanisms