Kwik Fab WIY FJ/FZJ80 Transfer Case skid

Got an 80 series?

Want to protect your transfer case but still have access to drain it?

Want a simple as heck DIY project?

Kwik Fab T Case Skid plate I made for a customer order who later dropped communication.

Skid is made of 1/4" thick mild steel, along with the brackets provided.

Galvanized carriage bolts are used for the lowest part of the skid, and stainless steel hardware for both front and frame mounting.

Only $100 $75, located in the Fresno County as I prefer a local sale if possible.

Weighs +20lbs



Below is an example of what needs to be done to finish this skid -



Either solid steel bar or square tube welded to each end of said part. One part bolts onto the inside of the skid and the other part is used to sandwich the frame.

No longer have my Land Cruiser so I do not have dimensions of the rear arm to recreate it.

 

Seen this in person, PURE BEEF!

 

I've had inquiries before for an affordable 1st Gen Taco skid; once I confirm dimensions I'll be making a two-piece as I'm limited in my cutting dimensions.

We'll save that for another thread though

 

Use mine for mock

 

Perfect!

I'll just steal some measurements so I can reproduce a 40s and tons bolt-on kit while I'm at it

 

No takers huh?

May just throw this on a display of 'parts made and not used'

 

Price drop