BORA 3/4” Spacers

Curious if anyone knows whether 3/4” BORA spacers will work with T4R ORD 17” wheels?

 

If the wheels have scalloped hubs / cutouts, then yes. If not, then you'll need 1". Unless you want to grind down the studs.

 

I’m wondering if I can use these on my setup. I currently have .25” generic wheel spacers up front because the wheels I have on the truck do not clear the calipers.

 

Only been able to find one picture of the back of them and it’s a set a guy pulled and had powder coated black. Doesn’t look like they have pockets to fit the 3/4 Bora’s.

 

@Mystery252 is right. That won't work because the wheel hub won't be fully mated/flush with the 3/4" adapter.
Nothing a router couldn't fix though.

 

wheel studs are cheap. just trim them. replace if you ever decide to a setup without the spacers