What Have You Done To Your 3rd Gen Today?

Which bumper is this by chance?

 

Mild/Medium OTT Tune from Matthew at CRS Tuning. Really woke this truck up! Matthew’s a great dude so if you’re in Georgia hit him up and get it done!

 

Extended brake lines. Rears are a PITA!

 

Against my better judgement I re installed my mud guards on account of the crud my new tires flung all over my truck.

 

Went to a tint shop today today and got a quote for a tint on truck and camper shell. $600 total for ceramic on the truck and regular tint on the shell. I told them I would take out and reinstall the screens on the sliding windows.

 

Installed my pro grille with lights. Taco Garage was the supplier.

 

I've had that one in my cart for about a month now in my cart. They get good reviews, what do you think?

 

Took me up to Weekii Watchee State Park

 

I am overall happy with it. Looks good, quality seems good. I have yet to drive it to see how/if it messes with the TSS. The lights were an easy install except the ground wire was missing the connector so I had to use my own and splice. Took me about an hour or two

 

I did some cheap mods today. Installed bed lights, and finished making a divider using what I had laying around. Prevents my groceries from rolling everywhere which can get annoying.

 

I started adding another mod today. The front two bolts was tough to get started. It’s heavy to handle by one person. May need to ask my neighbor to help tomorrow.

 

Installed a weboost, I got it for free and was surprised with how well it amplifies cell signal.

 

Transmission drain and fill. Oil/filter change. Added siless sound deadening material on inside roof.

 

Drove to Denver to have the tuner up the alternator output for the AGM battery and logged some data. Also pulled the VEDC out, inventoried everything, checked the expiry on perishables and medicine, tested the air compressor, etc. Just general winter prep.

 

More progress on the 3 link, just have the axle brackets to do tomorrow and I might have a roller by end of day

 

Well my K&N CAI Turned into a 7 hour install today I was 3/4 of the way done and just needed to tighten up a few hose clamps and layed my screwdriver and attached socket on a area I knew I shouldn’t of as I put it there. Sure enough I bumped it and it fell and heard it rattling all the way down into the twilight zone. I looked for hours and thought it might of fell on top of the skid plate. When I was getting ready to pull the skid plate I gave it one more look around and there it was on the Bottom of the front fender next to the fender liner. I turned into a contortionist So I wouldn’t have to remove the fender liner and got it out
Will update tomorrow with final thoughts since today all I did was fire her up and check for Idiot lights appropriately so
No lights after warm up and gave her a few kicks in the shorts and sounded wicked you could really hear it sucking in that air
Can’t wait to take the taco for a test ride tomorrow.

 

new tires... I hate beadlocks!!!!!!!

 

Not today but I installed SR tails on my OR. More chrome deleted.

 

I’ve been seriously considering getting tho OTT lately. I’ve only put about 6k on my V6 but it just feels like it’s sleeping all the time. How do you feel with the mild/medium tune. I’m not really looking for anything crazy… but I do want it to go if I need to get on it a little.

 

You’ll thank yourself for getting it.