What Have You Done To Your 3rd Gen Today?

Over the weekend I installed a Goose Gear rear seat delete. I had the factory sub but ending up removing it but I modified the bracket and kept the amp. Once the the seat delete was installed, I decided to run power to the back of the truck for my fridge and other accessories. I had a piece of 1/4" HDPE laying around the garage and with some 1/2" spacers, it turned out to be a great place to mount the fuse block. I also installed a Blue Sea Accessory Panel mounted in a Rago Fab 12v Accessory Panel.

 

so, mud gets slung on the OR fender flares, tried car wash, high pressure wand, and even hand scrubbing, but there is still spots where the mud was.

happen to anyone else? solutions?

prob going to happen to flaps too

maybe some different type of mud? once was in some red dirt area

 

Installed the original Sport cheese grater, blacked out though, grill. When I installed the warn bumper the bar is in the way of the front camera. Luckily, but angrily from the wife, I had bought the other grill for 20$ and installed it 5 years ago.
So, a face lift!

 

My wife has called my truck now, her truck and asks why I do things to it, and then she drives or rides in it and gets it. Where did you make the cuts in the chin strap for that bumper guard? I like it

 

Thank you! I did take my time and used a trim tool to make sure it went in well into the sides. It isn't perfect but it's as close as it'll get without taking them off.

 

Spent the weekend in the 4x4 area of Carova Beach, (OBX). Really appreciated the ARB (single) compressor and the SpeedFlate setup I put together a while ago. (Ran a line to the rear bumper). Worth every penny; saving us from the constant air up/down lines everyone else was dealing with when heading into town. From 15 psi to 29 psi in under 6 minutes.

 

You sure that’s mud… could be transmission fluid or brake fluid. Idk if your flares are textured but this stuff does great on my plastic tonneau cover, removes hardened sap and weird stuff. A semi soft brush will get into any valleys.

 

You might try 50/50 distilled vinegar and deionized water in a spray bottle. Or even some Adam's tire and rubber cleaner.

 

I need those TRD PRO inlays for the bed, Got a link?

 

Doesn’t that void the warranty?

 

Good for you on the payoff!

I've got a gas cap holder and locking gas cap!

No CEL errors in over a year of install.

 

Looks like you were angry at that license plate. I made brackets for that.

 

FINALLY got around to installing the SET port option puddle lights. They've been sitting in a closet since I bought the truck two years ago.

 

@Shmellmopwho killed it with this removable slider step! Asked him to come up with a step for the sliders I had from him so that my wife could hop into the truck easier being 6 months pregnant! Should be able to pop it off when wheeling!

 

I love that bumper! So clean

 

Like your Alu-Cab Canopy shell!

 

^Mr Ed ?^
Nice looking truck and slick air line setup

 

Your OTT is medium/mild and spicy ?
What’s the V9 a new version ?
I have the medium/Spicy I got about a month ago and love it !

 

Has anyone here had issues with the automatic hanging in 5th gear, revving up to 3500 rpm, with OTT. I read a few posts about that on FB.

 

Thanks buddy! So happy it works nicely for you guys. Thanks for the love!