Torn Steering Rack Boot - help

My passenger side steering rack boot has two small tears on it. (2011)
Do you think I could just clean it off real well then apply a silicone caulk to the tears?
If so, should I try to pack some grease in there first? What kind?
Or should I just get it replaced?
I'm on the road for the next few months so I can't really replace it myself :/
Or should I do nothing and just keep driving on it for the next few months?

 

You could probably get away with tape or some sort of silicone or sealant to close it up for the short term, but I'd probably replace the boot when you're able. I had this happen with my subaru and I was actually able to replace the boot without separating the tie rod end, only unbolted it from the knuckle. You can sometimes stretch and slide the boot over the tie rod end using a couple ziploc bags over the end and some grease to reduce friction and keep the new one from getting caught and torn while you stretch and slide it over. Not positive you can do this on a tacoma but could be worth a shot.

 

The boots are soggy because the rack is leaking fluid. There's no grease or anything in there, it should be dry. It needs a rack