1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clutch Release Help

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Bcb30139, Oct 14, 2023.

  1. Oct 14, 2023 at 6:49 AM
    #1
    Bcb30139

    Bcb30139 [OP] New Member

    Joined:
    May 21, 2023
    Member:
    #425115
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2014 4x4 6 Speed Man TRD
    Replaced the clutch assembly and TOB on my 2014 4.0L 4x4. All went well and confident in that product. Since though, the clutch pedal is engaging darn near the top of the travel. Also, the shifting seems very clunky. There is a noticeable clunk as I take it out of a gear and then again when going into another gear. Pedal presses to the floor no problem.

    I have seen the in-shop procedure for checking the pedal and I would say I have a little too much play in the pedal. Any ideas or suggestions would be much appreciated!
     

Products Discussed in

To Top