285/70/17 CMC

So i recently just got a set of Falken Wildpeaks AT3, 285/70/17 and for anyone wondering they DO rub and you will need a cmc. no rubbing when going higher speeds and turning. Only when backing up. Also rubs a bit on the part of the fender flare that goes under the truck. hope this helps someone!

 

Did you adjust the castor so the wheel is farther forward in the wheel well?

 

Not always. Depends on the wheel offset and alignment.

 

I did not, it already rubs on the wheel well/front fender

 

Wheel offset is 0 and trying to get an alignment appointment near me

 

Exatctly. It doesn't have anything to do with the brand and model of tire. That is irrelevant.

I have scs stealth with -10mm back space. Zero frame rub.

 

Alright, I was just trying to help anyone if they needed it

 

I figured the inner fender well would need to be adjusted, the bumper has a second hole for the fender well that’s further back, it and some massaging with a heat gun would give the room needed to move the wheel forward. Either way, thank you for your posts and insight.

 

Wheel offset and aftermarket UCA's are your friend. I have 285/75/16 on mine with 0mm offset and no rubbing and I have RokBlokz mudflaps on too. Just increased the caster on my OME UCAs

 

285/70/17s on +4 SEMA 4Runner wheels and no CMC, no rubbing and I have the factory mus guards.