1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wiring 3rd Brake Light from Leer Shell

Discussion in '1st Gen. Tacomas (1995-2004)' started by Hazycosmic, Nov 1, 2023.

  1. Nov 1, 2023 at 6:28 PM
    #1
    Hazycosmic

    Hazycosmic [OP] Member

    Joined:
    Oct 27, 2023
    Member:
    #436342
    Messages:
    5
    Gender:
    Male
    Vehicle:
    1999 Prerunner
    Hey all! Can someone refer me to some instructions for wiring my 3rd brake light to my 1st Gen using these wires coming out of my light. Thank you, Cheers!

    upload_2023-11-1_18-27-2.jpg
     
  2. Nov 2, 2023 at 1:19 PM
    #2
    Bivouac

    Bivouac Well-Known Member

    Joined:
    Sep 5, 2021
    Member:
    #376253
    Messages:
    11,580
    Northern Lehigh Valley Pa
    Vehicle:
    2000 Tacoma 5 speed 3.4
    Remains to be seen I bought the tires and wheels the rest came along
    Using your Meter figure which is the ground and which supplies the voltage to your new brake light.

    Just where are you hooking things to the truck brake light harness.

    If using the third brake light seal and insulate things well.

    Green /White stripe is system voltage .White/Black stripe is the ground connection on my 2000 double check with your meter.
     

Products Discussed in

To Top