1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

LC Engineering supercharger flange rubbing against fuel injector cups

Discussion in '1st Gen. Tacomas (1995-2004)' started by redneck_adjacent, Oct 18, 2023.

  1. Oct 18, 2023 at 12:51 PM
    #1
    redneck_adjacent

    redneck_adjacent [OP] Well-Known Member

    Joined:
    Aug 14, 2023
    Member:
    #431233
    Messages:
    235
    Gender:
    Male
    First Name:
    Mike
    Bellevue, WA
    Vehicle:
    1997 Tacoma 2.7L 4x4 W59 MT
    5 PSI supercharger 3" lift Bilstein 5100 shocks Old Man Emu springs General Spring leaf springs with 2" blocks and extended shackles 31" Firestone Destination XT tires LCE header and catback exhaust HPS CAI Tundra S13WE front brakes KC HiLites flood, ditch, fog, and backup lights Eaton Bussmann relay/fuse panel with custom power tray All Pro bumpers, sliders, and skid plates
    I have a vacuum leak at the intake manifold caused by the flange of my supercharger rubbing against the fuel injector cups, causing a wedge and therefore an intermittent vacuum leak.

    I created another thread for resolving this issue; however, I am curious if any other first gen owners with the 2RZ or 3RZ have experienced this, too.
     
  2. Nov 2, 2023 at 3:35 PM
    #2
    redneck_adjacent

    redneck_adjacent [OP] Well-Known Member

    Joined:
    Aug 14, 2023
    Member:
    #431233
    Messages:
    235
    Gender:
    Male
    First Name:
    Mike
    Bellevue, WA
    Vehicle:
    1997 Tacoma 2.7L 4x4 W59 MT
    5 PSI supercharger 3" lift Bilstein 5100 shocks Old Man Emu springs General Spring leaf springs with 2" blocks and extended shackles 31" Firestone Destination XT tires LCE header and catback exhaust HPS CAI Tundra S13WE front brakes KC HiLites flood, ditch, fog, and backup lights Eaton Bussmann relay/fuse panel with custom power tray All Pro bumpers, sliders, and skid plates
    Please refer to this thread for more information concerning how I resolved this issue. I hope that thread helps someone one day.
     
    sonoran likes this.

Products Discussed in

To Top