Door Lock/Actuator Question (Post Install)

crackils · Nov 2, 2023

Hi there,

My driver side (left) door lock motor went out a while ago and I'm just now getting to it. I took the lock assembly out of the door, replaced the motor, tested everything, and it worked.

However, I am experiencing a new "problem" (not sure if it really is one, though this is new to me), but when I lock my truck with the key fob I get the normal 1 beep, then followed by 3 rapid beeps that I am not used to hearing.

What does that mean and how do I make it not do that?

crackils · Nov 3, 2023

After work I'm going to disconnect the battery and reconnect to see if that resolves it.

crackils · Nov 4, 2023

Last bump, d/c'ing and reconnecting the battery didn't make any difference. Does anyone have any recommendations/insights? Thanks for your time.

Tiedie · Nov 4, 2023

Blackened Taco said: ↑

Step one: Open the drivers door and insert the key into the ignition

step two: Remove the key from the ignition and, within 5 seconds,
reinsert the key back into the ignition and switch to the on position.

Step three: After 10 seconds, the system enters the answer-back mode

step four: Within 10 of the answer-back beep the switching mode is
started, press the remote twice and teh system will turn off
or on based upon which the system is set.
Click to expand...

jmed99 said: ↑

This works!!!! My beeping has stopped! Do this...

Last Modified: 5-14-20085.1 DFrom: 200805Model Year: 2009Model: TacomaDoc ID: RM000000XXC01SXTitle: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: CUSTOMIZE PARAMETERS (2009 Tacoma)
CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION

The following items can be customized.

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.

Record the current settings before customizing.

When troubleshooting a function, first make sure that the function is set to the default setting.

If the battery is disconnected, the wireless answer-back buzzer will be returned to the default setting.

Item
Function
Default Setting
Customized Setting
Wireless remote control
Operation signal (Buzzer)
ON
OFF

(a) Open the driver side door and insert the key into the ignition cylinder.
(b) Remove the key from the ignition cylinder and, within 5 seconds, reinsert the key and turn the ignition switch to ON.
(c) After 10 seconds, the system enters answer-back buzzer switching mode.
(d) Within 10 seconds after answer-back buzzer switching mode is started, if a transmitter button (the same button) is pressed twice, the answer-back buzzer setting changes (off to on, or on to off) to activate or disable answer-back by buzzer.

HINT:

The driver side door is closed.

The ignition switch is turned off.

The key is removed from the ignition cylinder.

A transmitter button is not pressed for 10 seconds after answer-back switching mode is started.

The transmitter is operated but the second button pressed is different from the first.

Answer-back starts.

Thanks to beeftaco!!!
Click to expand...

Thy this you'll never hear it again.

Log in or Sign up

Welcome to Tacoma World!

Door Lock/Actuator Question (Post Install)

#1
crackils [OP] Sith Lord Jar Jar

#2
crackils [OP] Sith Lord Jar Jar

#3
crackils [OP] Sith Lord Jar Jar

#4
Tiedie The Only Shantytown Resident.

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Door Lock/Actuator Question (Post Install)

#1 crackils [OP] Sith Lord Jar Jar

#2 crackils [OP] Sith Lord Jar Jar

#3 crackils [OP] Sith Lord Jar Jar

#4 Tiedie The Only Shantytown Resident.

Products Discussed in Entire Site Forum: 2nd Gen. Tacomas (2005-2015)

#1
crackils [OP] Sith Lord Jar Jar

#2
crackils [OP] Sith Lord Jar Jar

#3
crackils [OP] Sith Lord Jar Jar

#4
Tiedie The Only Shantytown Resident.

Products Discussed in