Looking for pics of 275/17/17r instalation

I was going to put 285's on my 2022 Tacoma. But changed my mind and will be running 275's. I have 2 inch lift in the front and 1 1/2 in the rear. I'm looking for some pics of anything that may be out there. Wheels are going to be 17 inch with 0 to -12 offset and looking at Toyo AT III's for tires. Any advice or pics would be greatly appreciated. TIA

 

You’re wanting which size? There is not a size mentioned.

 

Did you look through Wheels and Tires?

https://www.tacomaworld.com/threads/new-toyo-open-country-a-t-iii-tire.655094/

https://www.tacomaworld.com/threads...70-17’s-on-their-tacoma.657776/#post-29168497

 

Ill be running the 275's. I was told by an installer that if I ran 285's, they would have to do some cutting on the plastic.

 

What aspect ratio?

You're probably going to need some cutting no matter what tire size you use with -12 offset. What width rim also? Offset doesn't mean much without knowing the wheel width, 8-9" wheels make things worse.

 

I want to run 0 offset on a 8.5 to 9 inch rim. Thats why im looking for a few pics to get an idea of what to expect.

 

What aspect ratio on the tires....275 doesn't tell the full size of the tire you are looking for.

 

Sorry there was a typo on the header. 275/70/r17

 

https://www.tacomaworld.com/threads/official-3rd-gen-275-70r17-tire-thread.394460/

Entire thread on them. I've got zero issues on the cab mount side. Did do a very small precautionary trim of some inner bumper plastic. But I'm also running jba ucas so there was a lot of room for alignment movement

 

Welcome to TW!