New wheels what tires

These arrived today scs gen 5 with -10. I really wanted the 33 inch pizza cutters but have read conflicting reports wrt rubbing. I have a 2.5 inch lift but don't want to get into excessive cutting. I have uca's sitting in box.

Any suggestions

 

With aftermarket UCAs and 255s it would be minimal for trimming. I’d go for it. 33s look better than just stock 265s especially if you have a 2.5 lift.

 

I recommend rubber tires.

 

255/80R17 will work. Shouldn't be any rubbing with 2.5" lift. A lot of tire options available too.
If I can answer any questions or assist with an order, feel free to shoot me a DM!

 

I’m running F5 -38 on 35x12.50. It should be very minimal for you.

 

Thanks for the advice. I bought rubber tires as instructed! I went with the Wildpeak in 255/80 R17 did a little liner pushing and will be getting it back this afternoon I will post pictures and clearance. I assume I am going to want to do a CMC and UCA's and I will tackle those before the holidays

Thanks

 

Look good guy knocked my rim but that is the way it goes