Ome 2881

I am trying to sort out what option would work best, so any input would be helpful. Wheelers off-road currently has the bilstein 5100 with ome 2881 coils with a 2” or 3” option. I do not have weight upfront so with that being said since the 2881’s are for medium load would it give me a higher lift than indicated? I’m trying to stay at 3” or slightly lower.

 

The lift amounts shown should be what you can expect without a load. Meaning you should be sitting at 2" of lift unloaded if you chose that option. I assume the only difference comes from the clip location on the 5100. Are you lifting the rear? If not 3" up front might look silly haha.

 

I appreciate the feedback. I’ll be ordering the all pro expedition leaf pack since I have some weight in the back. I’m just trying to get the truck as level as possible on both ends.

 

Not sure if you got them. I have 5100 bilstein with 881 ome. 2 inch lift with v6

 

Yeah, I ordered the 3” ones just haven’t had a chance to install. How are you liking them?

 

They were a little stiff for me but I also 95% of time drive paved road. When going offroad, they did well.