Anytime backup troubleshooting

Anyone know of a more direct path to anytimecamera.com? Apparently web site e-mail submissions nor voicemail is working.

 

the lack of responsiveness is what ultimately turned me off of the product.
mine would show the front camera when I was in reverse and I had to use the switch to see the rear camera.
this was not an issue with cables being reversed or anything of the sort.
the issue was in the switch that I was provided with in the kit when I bought from R4T.
legend has it there’s a guy who talked on the phone to a “technician”, but that tale ended with yet another anytimebackupcamera.com in the garbage.

 

Mine works great!! Switch for front or put in reverse for rear or switch for rear no issues. Always works

 

I'm such a procrastinator. It took me about 2 hrs 1 day, and 2 hrs another.

Biggest regret was doing it after I got my truck Krown rustproofed. It's as like I was taking a bath in oil, under the hood....(Kudos to Krown)

But I love it, and glad I went with the switch on the dash instead of the one of the steering wheel. My preference!

If I had to do it again, I'd be able to do it under 2 hrs total.

 

Problem resolved. Relay harness (not relay) was bad. Ohm'd out the harness and video inputs were incorrectly swapped. New one is in and working as it should. Thanks for all the feedback, may this thread help others in the future

 

Did anytime send you a new relay harness? Mines only able to actuate the front camera while in reverse. Front / rear are not able ot be actuated in any other gear. No black screens and they sent me 2 new relays.

Edit : I got this resolved. My issue was a bad video harness (I did buy the preassembled from TrailGridPro). The orange wire did not have 12v when the switch was in the front position. Brian sent me out a new video harness and I spliced it in, Works perfectly now.

 

yes they did, but did charge me ~$5 for shipping which I don’t agree wit but just wanted to get it fixed already.

 

I took apart the switch to see how it worked and was able to come up with a modification to get each FRONT/REAR LED to work independently. You need to cut a trace on the PCB and solder in a diode.

Here's my instructions on how to do it: https://timee1994.weebly.com/anytime-camera-switch.html


End Result: