What Have You Done To Your 3rd Gen Today?

HA! In my mind I'd make it...but with a fake knee and bad back, I'd end up face planting into the door!!

 

Finally got my Eibach Stage II on with some Icon AAL. I also had the cat shield from Talon's Garage installed and the TRD Skidplate. Stoked so far. The truck drives better IMO; less nose dive when braking/when heading out the driveway. Feels like less sway accelerating as well. Smoother ride as far as I can tell definitely feels less jarring going over potholes and speed bumps. Got around 2" lift all around.

 

That looks great!

 

It's been raining pretty hard lately. Bring an umbrella.

 

The song is "Wiggle it" by Kevax........I had to know so I looked it up.

 

Installed the Canvasback liner in the back seat.

 

SPECIAL SHOUTOUT TO @Shmellmopwho for the install. SOLID GUY. Thank you so much

 

just the sunlight in this picture looks depressingly warm....

 

Now we need a pic of the dogs doing their best....

 

I use this spot

 

Wasn't quite sure where to put my Viair 45040 until I found the Tuffy 161-01 Truck Bed Security Lockbox. It fit perfectly and there was room at the end to place the pressure switch surrounded by foam. I need to carve one more piece of foam to keep the pressure switch from bouncing around.

Viair Corporation 45040

$330 VIAIR 450C - Industrial Air Compressor for ‎Drilling, Air Brushing, Spraying, Nailing | 12V Continuous Duty Cycle Compressor for OEM Applications | 150 PSI, up to 5 Gallon Tank (Silver)

https://www.amazon.com/dp/B000FQ78VI?th=1

VIAIR 90111 Pressure Switch with Relay

$31 VIAIR 90111 Pressure Switch with Relay, Black, 7.3 x 3.5 x 2.3"es

https://www.amazon.com/dp/B000FQ793A

Firestone WR17602149 Air-Rite Single Cab Control Kit

$142 Firestone WR17602149 Air-Rite Single Cab Control Kit

https://www.amazon.com/dp/B000CMGWKI?

Ineedup 2 Gallon (8 Liter) 6 Ports Suspension Air Ride Bag Train Truck Horn Air Tank

$68 Ineedup 2 Gallon (8 Liter) 6 Ports Suspension Air Ride Bag Train Truck Horn Air Tank Car Horn Tank 200 PSI

https://www.amazon.com/dp/B0BN7FNS95?

Tuffy 161-01 Truck Bed Security Lockbox

$259 Tuffy 161-01 Truck Bed Security Lockbox

https://www.amazon.com/dp/B00PWXIIV8?


Layout


Cutout


Rivnuts


Tank placement/bottom of the lockbox


Airbag valve/compressor/pressure switch


Done!

 

Nice work! And even nicer write up!

 

I usually just push and kinda twist mine into the headliner and most of the time it actually works LOL I have a couple on the bottom areas of the seats and never have to worry about those coming loose LOL

Some pics of the patches I have. I still check them peridoically if some are loose otherwise they do just fine. Been looking into having my headliner re done next year but not decided on it. Just want some of my smaller ones to stay on without having to worry they'll fall

 

Stories and history behind all of these.

 

Aw, come on, you gotta at least try! Take one for the team!

 

Truck looks great!!

 

That is some 8th grade dance memories.

 

Looks very nice, you did a great job!

 

Did you get the hardware and mounting instructions with it as well?

 

Did your Talon's cat shield interfere with the TRD skid plate? TIA