Help Identify replacement part!!

I'm fixing my fudged up frame and had to cut my bed off due to rust. This cross member is broken and needs to be replaced but I cannot figure out how to find a replacement part. Any ideas welcome.

 

I believe that part is welded to the bed. Don’t think you’ll be able to find it alone.

 

On the ends there's removeable bolts securing it to the bed. I believe it's called a bed support but I can't identify the part online .

 

Using the VIN tag in the door jamb, you might be able to find a part number from here: https://partsouq.com/

 

I would just fix that one you have... a little bit of small gauge plate and some spot welding, done...

 

I'll probably have to just fix it as the actual part replacement is not common unless I can talk a rec yard into parting with one.

 

If that's your actual bed, just fix it.

If you cut it out, make a new one.

 

Now this might not be your exact microfiche……it’s a 96
But I’m confident that would apply

Those dotted lines of 3 X members mean that those parts only come with bed floor
Which is NLA

gonna have to cut and weld 2 new sections of X member where bed bolts are
Hell, probably $20 in material but the labor…..ugh
Lots of vids/TV shows out there to point you in right direction
Not rocket science, but with some patience/sweat/cursing/cardboard templates, completely doable
And
Non Appearance
So no body shop painting!

 

I'd just take a piece of angle iron and mount it right over that piece all the way across ....upside down...
taking care the fuel tank clears it....

and then space up the other mounts that same thickness.....so the bed levels out...


Kinda looks like it was off-roaded with a shell on it....
......I had a dakota that the front wall broke....probably from a shell sometime in the past....

 

Or find another bed......about a month ago....there was one in Jersey......

https://www.tacomaworld.com/threads/ute-bed.817220/#post-29314269