1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2020 TRD Off RD Grille to TRD Pro Grille swap w/ front camera

Discussion in 'Technical Chat' started by alexthesparky, Oct 22, 2019.

  1. Nov 29, 2023 at 6:20 AM
    #281
    TacoTorakku

    TacoTorakku Active Member

    Joined:
    Jul 8, 2023
    Member:
    #428545
    Messages:
    32
    Gender:
    Male
    First Name:
    James
    Vehicle:
    2023 Toyota Tacoma DCLB TRD 4x4
    265/75/R16 BF Goodrich K02's on Method 703's, Baja Squadron SAE Fogs, Diode Dynamics 30" Stealth Light Bar, TRD Pro Skid, CBI Mid-Skid, CR CAT Shields, Westcott Designs TIG/DOM Rock Rails, Bilstein 6112/B8 5160, Blah Blah Blah.
    IMHO - Get the harness too, they couldn’t be more different and reusing the TRD off-road one looks ghetto imho. Look how much longer the correct harness is, that’s what it takes to make the wires non-visible. Original bottom, suspension kit one top.

    IMG_8030.jpg
     
    cgalloni[QUOTED] likes this.
  2. Nov 29, 2023 at 7:47 AM
    #282
    cgalloni

    cgalloni Well-Known Member

    Joined:
    Dec 10, 2014
    Member:
    #144041
    Messages:
    539
    Gender:
    Male
    Thank you, I Will try to see how it looks with the original first if it looks to bad i will change it
     
  3. Dec 22, 2023 at 6:48 AM
    #283
    GLOCKAMOLE

    GLOCKAMOLE Well-Known Member

    Joined:
    Jun 23, 2009
    Member:
    #18814
    Messages:
    75
    Gender:
    Male
    First Name:
    Sean
    North GA
    Vehicle:
    2021 Cement TRD Off-Road DCSB
    Eicbach Stage 2R Coilovers, TRD 4Runner wheels, 265/75/17 BF Goodrich A/T, Pro grill, tint, ditch and fogs.
    Tried to get the oem grill. Didn’t work out, so I got an aftermarket and bought the oem bracket. Used a dremel to cut the plastic out enough to put a little pressure on the camera housing. Factory harness worked perfect. 3m tape on bottom of the camera and top of the bracket where it contacts the grill. Seems to work great and view is just like it was with the oem off road grill.
    upload_2023-12-22_9-43-56.jpg
    upload_2023-12-22_9-44-45.jpg
    upload_2023-12-22_9-46-8.jpg
     

Products Discussed in

To Top