Front Camera Anytime Kit turned Black

Hello! I was wondering if anyone had any suggestions regarding my issue. I recently installed the Anytime camera kit for my 2023 Tacoma. I completed the installation with no issues. It was working perfectly fine until an hour later I turned on the car and the front camera was now showing a black screen. The rear camera is fine in reverse and with the switch. I checked all the wiring and grounds and everything seems to be connected. I'm not sure how it could be working one moment and not the next. I have seen many troubleshooting convos on Tacoma world but none with this specific problem. Any ideas?

 

I wonder if reversing the yellow wires behind the deck will tell you if the front camera works when in reverse mode. Other than that its gotta be a ground issue somewhere.

Also I dont remember if a ground wire had to be used behind the switch on the dash. It's been to long..

 

I did just that and found the problem was I cut the purple wire. Called Brian over at Anytime Cameras and he said that was the problem. Patched it up and now it's working perfectly. Thanks for your help.

 

But it worked for an hour??????? Strange.