AC control module flat wire came out and now won't blow heat

Howdy, I was trying to fix the lights in my AC module but while taking the bulb out the flat wire ribbon popped out. I pushed it in but now only one of the 3 lights work and all are new, also my heat won't come on. Do you think accidentally pulling the ribbon out ruined the AC module and it needs to be replaced? If so any ideas of were to buy a new one and the cost. Thank you so much for your help! Pictures attached. thanks!

 

Welcome to TacomaWorld
https://www.tacomaworld.com/forums/1st-gen-tacomas-1995-2004.4/

 

great links thank you, hoping for specific detailed info on the subject, if any one has some.

 

Hey the same thing just happened to me, did you ever figure out the issue?
Edit: To anyone who stumbled upon this thread, I found out that the ribbon cable can be reconnected if it accidentally comes out of it's socket. Just be patient and try not to bend the blue end. I also found that the bulbs would come on only if I tapped on the climate control faceplate. Replacing the bulbs with T4 wedge-type LEDs fixed the issue.