Taco 06 Extended Cab Prerunner Sport .... TPMS Sensor Light Won't Shut Down

.....guys, it's driving me nuts! Went through the forums and youtube of course before asking. I do realize I now have a 3 inch lift on it. Which means did the reinitialization not take hold? Or am I not doing the right combination of things to turn it off? Keep in mind I upgraded the wheels and tires.... slightly larger where the psi is now at 40 instead of 36. Thanks in advance....

 

Does it flash first and then go solid or is it on solid all the time?

 

it just blinks at a steady pace

 

If it's flashing there's a problem with the system and/or one or more of the tire pressure sensors.
Most tire shops can check the sensors, if they are good you need to see what code(s) are in the TPMS.

 

Ugh.... had a feeling that was coming. Got new sensors along with the new wheel and tire package combo.... will report back later. Thanks for the assist!

 

Maybe one is defective or they weren't properly programmed to the truck.
Also I believe 06 has one in the spare as well.

 

Yes.... it does have one in the spare too.... if somehow air was let out of the spare and its not at the same psi as the others.....can this make my TPMS do what it's doing now?

 

It would illuminate solid for an air pressure problem, being it's flashing there's a system fault.

 

Ok ..... I'll at least be able to narrow things down and ask some solid questions, thanks again... much appreciated!

 

You can flash the codes out on the light with a jumper wire to get an idea of what your dealing with.

 

Ok.... went to a tire shop and the guy said it just needs to relearn the settings with the new tire and wheel set. Took less than 10 minutes!