1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Will Gen3 Lomax Tonneau work on Gen2 bed

Discussion in 'Tonneau Covers, Caps and Shells' started by muddog321, Feb 1, 2024.

  1. Feb 1, 2024 at 11:10 PM
    #1
    muddog321

    muddog321 [OP] Well-Known Member

    Joined:
    Dec 22, 2009
    Member:
    #27973
    Messages:
    1,136
    Gender:
    Male
    FL
    Vehicle:
    09 Tacoma DCSB 4wd TRD Off-Road w/e-locker Pyrite Mica
    TW 1-piece driveshaft with 1310 u-joints All Pro and Budbuilt skid plates OME Dakar rear springs 3" with 5100 5100 front set at 1.75" (3rd groove up) with stock springs Falken Wildpeak A/T3W 265/70R16 2018 TRD Offroad wheels 16x7J with +25mm offset Powerstop rotors with Z36 pads and rebuilt with OEM caliper kit Complete rebuilt rear brakes drums, shoes, springs, wheel cylinders Rebuilt rear diff with Yukon 3.73 ring/pinion Denso 130A rebuilt alternator AGM 24F Battery New OEM idlers and tensioner assembly New AC compressor New PS hose and flushed Walker SS Quiet Flow muffler Denso Iridium long life plugs #3421 (SK20HR11) OEM coolant, cap, and thermostat NAPA CV axles and new seals ECGS bushing Rhino front guard Shortened mud flaps Alziria Black Tail Lights Nilight Headlights X-Bull Traction Boards Maaco full single stage paint job 2023 Nat CV to Knuckle seals 710573 New SKF wheel bearings/hubs BR930978 New Moog stabilizer links K80946 & 948 New MOOG K80819 Suspension Stabilizer Bar Bushing 28mm New Dorman rear wheel bearings using complete axles 926-139 & 140 New Radiator support bushings Dorman 924-267 (front body mounts)
    Bed dimension widths are same and length is gen3 = 60.5 and gen2= 60.3.

    Looks like this model sits on top so will it seal on the gen2 tailgate top?

    Anyone who has done this please let me know as seeing used gen3 ones out there fairly cheap. No listing for a gen2.
    Would need to add a thick front bed rail seal to butt against like I had under my shell front so can seal that.
    Thanks
     
    Last edited: Feb 2, 2024

Products Discussed in

To Top