2023 SR Prewired for fog?

I've got a 2023 Tacoma SR

Truck did not come with fog lights however the relay appears to be there and the wiring harness looks like it's mostly there except for the last part where it would split off to right and left lights.

Here's a few pics.
What would be the most elegant way to wire this truck for fogs?

Thanks everybody!

 

https://www.tacomaworld.com/threads/nitoris-oem-sr-foglight-mod.451495/#post-13247956

 

I had a 2017 at that was not pre wired for fogs. You definitely have a lot more than I did. Looks like you even have a switch.

 

I can tell you from the last picture that the stalk plug there does not have the wires needed for a fog light switch. Not sure about the rest, but that thread @grad3r posted will walk you through it.

 

Hi Lawrence, did you do that fog light mode? If so where you able to use that connection in the center photo to connect a harness for lights? Then what did you do for switch and where did that plug in under the dash?
Thanks

 

Hey Earl, click on link at post #2.

 

Tell me if I'm no seeing something. In post #2 after reading the top portion the instructions say here is my method for non pre-wired fog lights???

 

Yes, yes it does.

 

Adding the missing fog harness at the bumper then to fog lamp(s).
Adding the missing terminal at connector M6.
From missing terminal add, a crimped wire to an ON-OFF dash switch then to ground.
All done.