1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Tow Hook bolt size Wiring up an aftermarket stereo in addition to the stock stereo cassette deck Temperature gauge sits high but temps are normal Dorman Side Marker for 1st Gen....anyone have experience? Mixing poly urethane and rubber [Solved] Engine Misses for 10 -15 Minutes, Then Clears Up. Check Engine Light Comes On

Drive shaft support bearing

Discussion in '1st Gen. Tacomas (1995-2004)' started by Toybuck, Nov 27, 2023.

  1. Nov 27, 2023 at 7:37 PM
    #1
    Toybuck

    #1
    Toybuck [OP] Member

    Joined:
    Nov 7, 2022
    Member:
    #410154
    Messages:
    10
    First Name:
    Bt
    None
    Ok guys I have replaced 4 drive shaft support bearing. This year. How do I solve this problem? Any ideas?
     
    Toybuck, Nov 27, 2023
    #1
  2. Nov 27, 2023 at 7:45 PM
    #2
    Gen1andDone

    #2
    Gen1andDone Well-Known Member

    Joined:
    Jun 20, 2023
    Member:
    #427267
    Messages:
    452
    Vehicle:
    2002 4wd Tacoma TRD v6
    What part have you been using?
     
    Gen1andDone, Nov 27, 2023
    #2
  3. Nov 27, 2023 at 8:09 PM
    #3
    Laxtoy

    #3
    Laxtoy Dog is my backseat driver

    Joined:
    Feb 14, 2015
    Member:
    #148610
    Messages:
    1,364
    Gender:
    Male
    Maltby, WA
    Vehicle:
    99 3.4l 5 speed 4WD 2023 Limited DCLB 4WD
    Fox 2.5 DSC resi CO's w/ 700lb King Coils, Camburg uca's, T-100 rear leafs, 13WL Tundra brakes, 1" 4crawler body lift, 295/75/16 Hankook MT, Ruff Stuff u bolt flip, 10" Fox LSC resi shocks turned back on custom mounts, home built rear high clearance bumper with dual swing outs, Diode Dynamics SSC2 Pro rear floods, Skid Row front and transfer case skid, home built transmission skid, Mercerfab sliders, home built front bumper, Badlands Apex 12k winch with synth line, 4.56's, ARB rear locker, LonePeak wedge camper, eBay snorkel, Sierra LEDs 20" dual amber/white light bar, Diode Dynamics SS3 Max amber fogs, Mini D2S projector retrofit, Blue Sea ML-ACR, dual Odyssey PC1200's, 100 watt solar panel, 20 plate heat exchanger/home built shower kit
    $101 211750-1X Center Bearing Compatible with Select Toyota Models 1995-2021
    211750-1X is a Spicer part that is essentially a Toyota OEM part, even has a Toyota part number stamped into it- as best I know it’s still the case, may have changed

    Chances are if your burning them up you’ve got other reasons contributing- either too much angle from the driveshaft putting stress on it, or what I’ve noticed, if you shim the carrier bearing down it throws off the angle and burns them up faster
     
    Laxtoy, Nov 27, 2023
    #3
  4. Nov 27, 2023 at 10:10 PM
    #4
    O'Silver_Taco

    #4
    O'Silver_Taco Well-Known Member

    Joined:
    Aug 26, 2021
    Member:
    #375390
    Messages:
    4,246
    Gender:
    Male
    First Name:
    MD
    Vehicle:
    98 Dlx Sr5 ext AT Rwd
    3rz to 2Rz bebuilt block and new heads
    I would think too much lift.....or rear axle wrap...

    what's the condition of your rear leaf's and shackles ...

    has the truck been lifted..

    AT or MT....what's the condition of the transmission mount?

    Any chance your motor mounts are shot...

    How many miles on it....


    that carrier has slight adjustability ....where did that slot end up....are you right in the middle of it at mid-way...
     
    Last edited: Nov 27, 2023
    O'Silver_Taco, Nov 27, 2023
    #4
    sdk1968 likes this.
  5. Nov 28, 2023 at 12:01 PM
    #5
    Andy01DblCabTacoma

    #5
    Andy01DblCabTacoma Well-Known Member

    Joined:
    Mar 12, 2021
    Member:
    #359086
    Messages:
    3,998
    Gender:
    Male
    First Name:
    Andy
    San Diego, CA
    Vehicle:
    01 Double Cab v6 4x4 TRD
    F: Kings SPC, R: 5100s+J59s. Custom armor.
    How are you installing them? Following the correct torque procedure in the FSM, etc? There is also a section about aligning the carrier bearing to be perpendicular to the DS- have you checked that?
     
    Andy01DblCabTacoma, Nov 28, 2023
    #5
    sdk1968 likes this.
  6. Feb 5, 2024 at 5:51 AM
    #6
    Toybuck

    #6
    Toybuck [OP] Member

    Joined:
    Nov 7, 2022
    Member:
    #410154
    Messages:
    10
    First Name:
    Bt
    None
    Ok guys. Springs are good motor, mounts are good. Alignment is good. Drive shaft angle might off. But what is the correct angle. The truck dose have a lift installed befor I got it.
    The cardan joint is not real smooth. Help please
     
    Toybuck, Feb 5, 2024
    #6

Products Discussed in

Spicer 211750-1X Center Bearing Compatible with Select Toyota Models 1995-2021
$100.79
To Top