No Daytime Running Lights on 2nd Gen Tacoma

I recently installed a new set of headlights on my 2014 TRD. The new lights are supposed to have DRL, and my headlight switch has a DRL option. The low beams, high beams, parking lights and turn signals all work as expected, however there are no lights when the switch is set to DRL. I tried checking for a DRL fuse in the two fuse boxes but was not able to find anything. I had a similar problem with another pair of new headlights that I tried installing, so I assume the issue is not with the lights themselves. Is there anything I can do to make the DRL work?

 

welcome

on 2nd Gen DRL is a function of the parking lights if so equipped.
making them work will depend on your level of wiring prowess

a lot of good headlight info here https://www.tacomaworld.com/threads/the-ultimate-headlight-upgrade-h4-not-led-or-hid.398066/

 

DRL is NOT tied to the Parking circuit. It activates after engine is ON and Parking Brake is released. The TACO also needs to have the correct HAZ/TURN/DRL relay and harness.