What Have You Done To Your 3rd Gen Today?

New shift knob, I also have some ranger eye patches coming to swap out the Tinkerer one.

 

It was from Amazon! Let me see if I can find the link

 

Actually from eBay!
https://www.ebay.com/itm/1560626341...c7AHLNLRWy&var=&widget_ver=artemis&media=COPY

 

Looks amazing!

 

Dang sorry!!

 

Also, good eyes to notice it!

 

Thanks!!!

 

Yeah... bought one from @MESO a while back for my '18, but they've been discontinued since. This looks like the next best thing. Thanks, again!

 

Yeah unfortunately this is all I could find too!

 

Makes me miss my super white!

 

Does the free drill bit offset the cost of the new tire?

 

I wonder if Home Depot will give me store credit for the drill bit..

First thing I did was check my tool box to make sure it wasn’t mine. I was expecting a flat tire this morning, but it never lost tire pressure! Made it all the way to Discount Tire

 

Started working on the bumper.

 

I fixed my chirping serpentine belt at 71K miles. Had to wait two weeks for the $55 OEM part back order from Toyota dealership. Exact match and the engine is nice and quiet again. Considered using belt conditioners fix but a new belt gave me more peace of mind even though 71K miles seemed a little early. Belt was 4.5 years old.

 

Hooke Road Tailgate panel.

 

Blacked out some ish

 

If you haven’t trimmed the fender liner yet, use caution on the driver’s side towards the engine compartment. There is a radiator hose behind it. When I did the viper cut on mine I pulled the liner up to check behind before cutting.

 

Burnt toothpicks everywhere. Sierra Nevada used to be nice and green.

 

Thanks for the heads up I have not cut any of the liner yet. Was wanting to see if I would look good formed up out of the way or just cut. I’d I decide to cut I will definitely check before starting.

 

Got my mountain hatch tailgate board in and installed today then installed ESI Rock Block between tailgate and bed