Where do you get connectors

I want to tap into my front camera wiring via the shift knob without cutting wires.

I need the female connector that fits the connector going to the front camera switch.

the numbers I found were: 8P060K-TS-M and 90980-12551

eight pin female F51

is there a way to cross reference this type connector to another that can be ordered?

thanks

 

Did you ever find a source to order this 8pin connector. I'm headed down that same road of trying to connect the oem front camera to the MESO stealth shift knob. If I can do it without cutting it'd be nice. I've only been looking for a day but haven't been successful.

 

I was able to find what I needed through this website after some digging, connectors and terminals

https://www.hi-1000ec.com/

 

Yeah, they are who I use for those type. They are Sumitomo 060 TS unsealed series.

Female housing:
https://www.hi-1000ec.com/phone/product/2737
Male housing:
https://www.hi-1000ec.com/phone/product/2734
Female terminal:
https://www.hi-1000ec.com/phone/product/1302
https://www.hi-1000ec.com/phone/product/1304
Male pins:
https://www.hi-1000ec.com/phone/product/1301
https://www.hi-1000ec.com/phone/product/1303

 

If you look at the connector, "we" are only connecting two wires. I ordered what I thought was the right connector to only get the wrong one. I ended up putting two pins in the original connector with the wires going to the shifter. Very easy, that way I can always remove the two pins as if nothing to see here would happen.

Very nice mod, I use the camera more than I thought I would.

 

Thanks, that's my plan if the connections I get don't mate up properly.

 

Replying here for members that search for this down the road.

I had purchased the connectors from https://www.hi-1000ec.com/ based off a post in this thread. But they turned out to not be what I needed.

https://www.tacomaworld.com/threads/ect-stealth-pro-shift-knob.597659/page-95#post-22755294

I had sourced these shortly after buying my truck but waited a long time to install since I wanted to do it along with a few other mods that all involved pulling apart the dash. That's when I learned the connector was wrong.

I eventually found what I needed online on Ali Express.

Here is what I used that worked for me.

https://m.aliexpress.com/item/32568...lgo_pvid=b972b5d9-6b59-48f2-9c68-9eeb82b4aacd

Since receiving the item (and learning the part number) I found this as well. Although with the link below I don't know if it comes with the pins you'll need.

https://www.toyotapartsdeal.com/oem/toyota~housing~connector~m~90980-12248.html


Some pics of the connectors next to the OEM switch and installed with the OEM harness and connector.

 

Thanks for posting this.

The toyotapartsdeal link you posted for 90980-12248 works, but did not include the pins. My local dealer could not find the lookup number for the pins, so I ended up ordering from Aliexpress. The male and female connectors from this link worked perfectly:

https://www.aliexpress.us/item/2255799994828732.html

 

Here's Toyota connectors and terminal manual. It list every connector with the corresponding terminal needed. Not sure what year it goes to.

https://www.mediafire.com/file/dpafxw0dlm8wzaw/RM06H0E.pdf/file

 

Thanks, this is incredibly useful

For the record, the pins are 0.64.