Lost in lifts

New to the forum been reading along on lifts. I just bought the truck and it rides worse then my diesel truck. It has a 3in lift springs in rear with bilstein 5100 in front with 885 ome coils. The front is an awful ride it is set on the top notch which I have read is bad. It has 285/65r18 tires that rub at full turn so identify want to lower it any. How do I fix this, what coils does it need. How much lift is it set like this. Thanks for the help

 

welcome to TW

it’s probably rubbing on the inner fender liner or the cab mount.

You can easily trim the front fender liner with some tin snips or a very sharp knife.

Can mount is a bit more involved.

Also, I cannot verify this but I was informed that 5100 is designed to use the stock springs.
https://www.tacomaworld.com/threads/bilstein-5100-on-top-notch-or-lift-springs.735886/

https://www.tacomaworld.com/threads/5100s-with-ome-887-notch-setting-for-3-lift.589196/

 

That is correct I talked to modify.com today, very good tech support. He confirmed they were intended for stock springs.

 

**********

 

Not knowing the year of truck and parts, Ome 885 by todays spec are likely too long a coil if 5100 circlips are also at top circlip.
If the truck is level with 3" up in rear, the front is probably too high.

 

It's a 07 Doublecab