Quick installation question

So I just got the fox 2.5 with resy coil overs. I got the ones for basically no lift 0-2 inches or whatever. And I was curious if when you guys installed them, you just run the 3 bolts and washers down from the top to hold it in place, that would make the most sense it’s just my oem ones on my 2006 have nuts on the top, I was just curious if anyone who has installed these knows, I’m pretty sure it is I just wanted to verify!

 

Yes, for the Fox 2.5 you will have bolts installed from the top that thread into the mount that is part of the shock body assembly. Stock shocks have studs that extend up through the holes and then use nuts. Same idea, just different execution of the two products. Torque for the Fox shocks is less than OEM if my memory serves correctly so follow whatever spec they give you on those top bolts.