Let's see them wheels with negative offset

Anyone running 17x8.5 -6 have pics ?

 

TE37 -20 + 1.25'' Spidertrax

 

-52 Total offset I can't I shine how bad the bump steer is. It's already bad on -25

 

Definitely present, but not too terrible.

 

That is a beautiful rig you got there.

 

What kind of off set are your wheels?, currently have 265/65R17 on a 17×9 -12 wheel thinking about going to a 265/70R17 did you rub on stock suspension?

 

I’d take this car over my Tacoma.

 

Joined the -38 club last year but I think it will be short lived. Looks deadly though.

 

16 x 8 -10 on 265/75/16's. No rub but tires are old. Don't see how they'll rub with new ones but have a 1.5" in front and 2" in back. I'll definitely be getting mudflaps as I drive on muddy rocky roads A LOT.

 

Nice
You'll be fine on -10. My son has -12 and aggressive 265s... No rub

I had to get mudflaps as well.. -25 offset would have caused rubbing. I wound up grabbing the Plasticolor ones

 

Hey dudes! Been a while since I posted on TW but I got new rims and went bigger on my tires. I got Black Rhino Warlords 17 X9 6-139.70 -12, and Mickey Thompson Baja Boss 33x12.5. I got an alignment at a great place who does lifted Tacos all the time, and have plenty of experience with my SPC UCAs.

I have some pretty significant rubbing going on. Already spoke with a local dude to get a cab mount chop done. Is there anything else I could do to get more clearance? I don't want to be a mall crawler. I like my truck being functional, and this tire/wheel combo looks sick. Pictures of each cab mount below. Upon reinspection, looks like I am rubbing on my front wheel well, as well.

Thanks in advance for any help!

 

17x9 -12 with 285/70/17




17x9 -25 with 295/70/17

 

17x8.5" -6mm offset FN Wheels Overlander:








These are all 2nd Gen Tacomas, but I'm trying to find some pictures of the 17x8.5" -6mm FN Wheels Five Star on a 3rd Gen Tacoma for you too. If you're trying to gauge the stance, then fitment / look is very similar between Gen 2 and Gen 3 Tacomas:

 

My wheels only were available with 0 offset, so I installed 1.5" spidertrax wheel spacers.(to give it that "wide stance look") I read all the negative comments about the added wear and tear on the wheel bearings, but 20K miles later, no issues. Since I'm always tinkering with my truck, I can keep an eye out on the bearings. Haven't had any alignment or steering issues so far. and love the aggressive look

 

Did you like those toyo rt trails?

 

Yes, I liked the Toyo RT Trail, but only had them on the truck for a couple thousand miles...so I wouldn't be able to tell you how they wear/ride long term. The only reason I swapped them out was to go bigger, with a more aggressive look.

 

305/50r20 (32.5"x12") Atturo Trailblade XTS tires & Vision Razor 20x12 -51 offset

 

How many are running total chaos uca's with -38 offset wheels? JBA or SPC seem to be recommend the most.

 

2021 Tacoma TRD Sport. Just threw some 17x8.5 -10mm KMC km552s on with 265/70/17 Toyo ATIII tires. Noticed a tiny bit of rubbing when turning so adding a 2” leveling kit.