What Have You Done To Your 3rd Gen Today?

I thought mine is powered by my magnetic personality.

 

Does it really? Shit I need it for this too

 

Installed Diode Dynamics C1R pod in the back next to license plate, I wanted a red color rear fog light that can also be served as a chase light.
I like how DD's C1R has three modes, bright white for reverse, dim red for running light, and bright red I will be wiring into the switch panel for rear fog/chase.

 

I have the speakers, soundskins, and noico ready to go.....just need a few day to install it all

 

Nice! It's going to sound great! Good luck with your install.

 

Thank you! Any tips or suggestions about how much noico i should place inside the door? Total novice on this stuff

 

I covered the entire inside of the door. Make sure you have one of those small rollers, they really do help. I wish I would have taken some pictures during the process so I could share them with you.

 

Ill do the same then. I see some people share photos with just pieces everywhere. I assumed a total covering would be best but didnt know. If thats what you did tho, ill be doing the same!!

 

Carefully save the small white clips that easily fall inside the door (not break, just fall into the void). Reinstall of the panels with the clips is better done by attaching them to the panel (not the door) then push them into the door.

 

I love that solid snap sound of closing the doors!

 

Thanks for the tip!

 

i used a small wooden roller for wallpaper, found at the box store, try to use whole sheets as much as you can, I think mine had grids on it, which helped on the layout. The bottom of the doors goes pretty quick, use some cardboard, like pizza box cardboard in areas you can’t see, making a template, then transfer over to the foil backing and cut it out..

 

Obviously you did the back of the door, sides and bottom. Did you also do behind the cross memebers of the door. Like the metal the door plastics pull off of?

 

Installed Baja Designs S2 flush mount lights to the Backwoods bumper. Had to enlarge the pre-cut holes on the bumper a bit, simple quick work.

 

Correct, only the outer skin, and speaker mounting flange, could not see doing anything between the interior plastic and door skin.

 

From "Damnation Alley". Looks close enough ...

 

Folks would claim they weren't good enough and change them anyway..........



.

 

I used to enjoy it too, until some hard working tax payers tried to steal my rig by ripping off my driver's side door handle and sticking a metal rod in the door to unlock it.....never been the same since

 

Looks like two dirty dogs in the wild.