XTP IMS 3rd Gen?

Would anyone be interested in an XTP intake manifold spacer for the third generation Toyota's? Already have it designed up, just curious if there's interest or not to consider going forward. Will be much like the predecessor as far as installation and there's HP/torque gains to be had! Looking at increasing to 3/4" thickness for more performance. Opportunity available for individuals interested in an install write up and or even assisting in Dyno results. Let me know what you guys think.

 

Roll them out! I had one on the last truck and just got one from you for this truck.

@Brownmatthall , @Merling , @Chasespeed

this could be interesting

 

Color me curious

 

I'd be curious when integrated with a tune.

 

I know kdmax has a version of the tune for the Anderson spacer, I think he said the gains were minimal compared to just the tune

 

The intake manifold spacer has been proven to work with many mods or none at all. It would only do to improve what the tune has already delivered. Intake manifold spacers move the power to where it's more usable in the lower mid-range. We don't drive 80 mph all the time but we definitely Drive 25 to 45 every day

 

What price point are we thinking, close to the second gen one?

 

what was the thickness before?

 

Yes would be similar. Depending on whether or not I made it a thicker spacer.

 

Gen 2 are 1/2" 6061 Billet Aluminum.

 

Is that the same thickness and the anderson? And the price point?

 

Count me in on interested in development if you’re still looking! I’d love to get an extra hp/torque bump lower in the RPM range and would gladly write up an install guide.

 

I think that one maybe half inch. I've been looking at 3/4"

 

OK sounds good!

 

I’d be in for one.

 

I'm interested