Rear Suspension/Brakes Torque pics

Front driver's side wheel well torque specs













Rear driver's side wheel well and frame torque specs

 

Although there are torque specs found all over the forum, pretty nice that you put together pics along with their respective torque specs.
I'm sure it'll be useful to some members who aren't as mechanically inclined.

 

That is a really cool thing to do. I could have used this when installing/retorquing my suspension setup.

 

Totally agree, I just retorqued my king suspension. On top of that, my 23 is "affected" by the axle recall so I just went under and torqued them to spec until I get more info from Toyota.
TBH, my guess is all they're going to do is undo the bolts, check the mating surface and torque to spec

 

I'm in the rust belt and recently bought my first Tacoma (used 21 TRD Off Road with 16k miles). I'm spraying with Surface Shield for rust prevention and checking torque on bolts while in there cause why not, but im not removing any bolts just yet. This compilation all started cause I recall reading about issues of bolts being found below torque on the suspension, axle, or perhaps other places, I'm not sure.

If I were to check the mating surface of the bolts, what would I be looking for? Always interested in learning.

This will be a great resource to go back to as I try to get this baby to 300,000+ miles. Glad I can share it with the community.

 

You'd be looking for anything that would keep the bolt from sitting flush