Can I wire two led light pods to my factory fog harness?

I am about to install a bumper and wanted to put two light pods on both sides. I wanted them both to turn on everytime my lights turn on however as I don’t want to have to turn them on everytime. Is there a way I can wire two to the fog light or will that cause damage? I wanted bright ones as well like the aux beam light pods. Let me know. I got a 2021 Taco

 

Yes, as long as the lights combined don’t draw more power than the original lights. Just need a pigtail adapter to match the truck harness and it’s simple plug and play.

 

Would it be bad if I was drawing more power? The regular fogs are 55w or 110 for circuit and trying to find 4 lights that combined equal under 110 would be buying cheap 25w ones.

 

most state you can only have one extra pair of lights active at a time
also fog pattern and aux driving pattern are completely different and are for oppest driving conditions
fog info https://www.tacomaworld.com/threads/the-led-sae-j583-fog-pod-fog-light-review.554813/
aux info https://www.tacomaworld.com/threads/the-sae-j581-aux-high-beam-thread.696597/

drawing more power would melt the wiring and might start a fire

 

Easy, just run a relay that triggers off the factory fog lights.



Just tap into the factory fog light power side for 86, done. No risk, the relay uses very little power.