5 lug Leaf spring help

hello, will these leaf springs fit a 2008 5 lug RWD taco? fitment says it will but i am skeptical. thanks for any and all help! https://www.roughcountry.com/product/replacement-leaf-springs-8075kit

 

It does state that it is for vehicles with a 3.5 " lift so on a 5-lug it'll probably give about 2 1/4-2 1/2'" of lift over stock. You would also have to flip the center pin over to work with the 5-lug SOA setup and the u bolts won't work so since they are made for a SUA axle setup so you will need to get different ones to handle the extra thickness of the leaf pack. Aside from all that, yes they will fit.

 

thank you so much for the info, any recommendations on u bolt size? ik that 5 lug u bolts are 9/16 and 2.5" inner diameter, but any idea on length to make these leaf springs work?

 

Not sure how long they would need to be, I'm a lowered guy so I've never needed to know how long the stock u-bolts are. At a guess I'd say 1 1/2" longer than normal. Looks like it has 7 leaves compared to the usual 3, so you could just measure how much space the regular leaf pack takes up and add that amount plus a bit to the overall length and that should cover it.

 

good to know, thanks again.

 

Those wont fit our 5 lugs easily. When looking for our stuff it usually will say none pre-runner 2wd.

 

good to know, would you happen to know any leaf springs that will offer a lift and fit 5 lugs? ty

 

So unless your springs are shot we usually suggest an aal (for lift) or sumo springs (for load).

Here's where I would get springs if I needed them. You're looking for the 2wd except prerunner ones. They have a normal size and a hd with an extra leaf. Keep in mind the hd could be stiff as shit but then again you could always remove the extra leaf if it is the case.

https://www.generalspringkc.com/leaf-springs/toyota/tacoma/2005-2011-toyota-tacoma-leaf-springs/