3rd gen 285/75r16 fitment question

2019 trd offroad, OME 2” lift. I am running stock wheels which I believe are 25mm offset. I have KO2 285/75r16s.

Issue: tire tubs on UCA

I was wondering if I put on some spidertrax 1.25” spacers to push it out from the UCA will lead to rubbing else where in the wheel well. If anyone has a similar setup please chime in. Thanks

 

https://www.tacomaworld.com/threads/show-your-285-75-16-and-285-70-17.469963/

Theres plenty of info in This thread. Most guys say 16x8 +0 is the sweet spot

 

Safer to trim a fender or wheel well than grind down a spindle or UCA. Bump the tire out, either with the spacers or a different wheel and deal with the less critical rub points when they arise.

 

This UCA rub issue for this size tire has been published.
+15 offset will clear factory UCA. You can order a 10" spacer from BORA.
But it just barely clears the front plastic and back cab mount, depending where alignment is set.
Barely clears works on street driving, not offroad with full stuffs. Choice is yours to get a CMC or not.