What Have You Done To Your 3rd Gen Today?

I saw another member with this knob and I had to get one. It feels so much better in hand than Trd pro knob. I do not regret and highly recommend this mod!

 

Took her fishing.

 

Added an angled USB to keep the android auto dongle out of the way.

 

How are you liking it so far? And how much was it if you don't mind me asking ? Thanks!

 

Installed an OPT7 Redline Parlux tailgate light bar. Hopefully it may help prevent another incident like the one that cost me my previous Taco.

 

Took it out on it's first camping trip. Softopper and topper tent were a great success!

I tried without adding any velcro in the bed as desired in the directions. That did result in the topper tent being loose on the sides. After using it in real world scenarios, I went ahead and added the velcro as soon as we got back.

There are some cons that I do need to figure out. Ventilation and condensation. The truck bed was sweating when we got up this morning because it got very humid overnight and down into the 50's. The topper tent has a massive bug screen for great air flow, however I probably need to get something like the Softopper dog window kit for the front and make a screen so there can be air flow throughout the sleeping space.

 

The USB adapter was ~$10 but it came with an angle for every direction (up/down/left/right). Seems to work so far and is a perfect flush fit. I wanted to tuck the dongle away without bending the wires too much.

 

Oh neat. I saw another Tacoma with something like this and thought it looked pretty cool. I might have to look into it.

 

I measured the lowest point of the liner which is towards the front, I used that measurement and cut the fender so the liner won’t stick out below the fender, you’ll know what I mean when you do it. I also removed the flare from the fender and cut separately.

 

They’re from Rokblokz.

 

Painted grille letters to match wheels
And started my sunroof sticker collection I usually have this on all my vehicles. Surprised it took me this long to start it on this vehicle

 

I installed the Mishimoto silicone induction hose. I wasn't sure how loud it would be but I'm liking it so far. Noticeable throaty tone above 3k rpm

 

I installed the same one, very happy with it.

 

Tested out the suspension travel and compared with my brothers F150. Bilstein 6112 set at 2" with 5160's in the rear and Archive add a leaf with hammer hangers. Tire size 255/75R17

 

sealed up the bed and put the cap back on to see if I have any leaks still.

 

I love mine. It's not the same one. Its the full length bar instead of being two pieces. Had it on for 2 years about now and zero issues. I've thought about getting a second to mount onto the rear roof rack cross bar.

 

Love that setup!

 

use 2 containers

 

Looks good.
If you want to have it breath just a bit better, get the TRD air accelerator.

 

Chipping away on the forgotten- check out that purchase date