PRINSU ROOF RACK SLIM LED BAR BRACKETS

Please let me know if you have any questions!

 

Is there a Presidents Day sale going on by any chance?

 

Unfortunately no presidents day sale.

 

Bummer...too bad

 

Today is the last day to get 10% OFF our roof racks ⁠⠀
⁠⠀
Head to the link right here! https://caliraisedled.com/collections/roof-racks
https://www.instagram.com/p/B-Zo5vujRBP/?utm_source=ig_web_copy_link

 

Anyone else having significant windshield/hood glare issues on silver colored Tacoma’s? Almost no point in using the lightbar with the glare this Cali raised lightbar is causing...

 

I’ve got a quicksand, I do get flare but not too bad when I angled the bar up to its fixed position, pointed down the road. If it’s pointed down in any way it gets glare.

 

Cool I’ll try that out! Thanks

 

Well, I tried just about everything to fix the glare caused from the lightbar on the windshield. The only option I had was to move the lightbar back and make some additional brackets. I tried just about every position of brackets and fairing position, including moving the lightbar back and forth. This setup allows the fairing to block light cast on the hood/windshield. It looks ridiculous From the sides, but it makes the lightbar functional.

Hope this helps someone I the future. Caliraised or Prinsu should design an adjustable visor that can be made for lightbars to help fix this issue. Just a thought

 

Hi there! That was something we fixed while designing our rack. The ALWD will allow your LED bar to stay protected behind our adjustable fairing when not in use, keeping you street legal and reducing almost all wind noise from the rack while driving. Once you hit the trail, you can adjust your ALWD to the down position in 30 seconds or less, revealing your LED bar and allowing it to shine down the trail while also preventing unwanted hood glare.

 

Gotcha! Super cool design - nice work guys. If only prinsu would do something like this

 

Thank you!

 

I'm having the same issue with mine. The bar feels like it's pointing at the sky but it can't tilt down anymore and there's still a lot of hood glare especially when the truck is dirty.

I'd like the bar to sit lower and further back (and be able to tilt lower) like yours.

How'd you make the bracket? Do you have any additional photos of it?

Has anyone else came up with a good solution to this?

Thanks in advance!

 

Yes if you mount it to the back extrusion bar it should sit back more.

Thanks,

 

Where on your website can find/purchase the ALWD?

 

It is only available with our Tacoma Roof Rack!

 

Lol
Ah-I can sale mine and get that version!

 

Oldie but goodie and probably the right place to post. Over the weekend I installed the Prinsu rack and the 42" slim light bar. The mount I used for the light to the rack is Prinsu's mount. I mounted it to the first cross bar and not the cross bar behind the wind fairing. The problem I am having is the light is aimed too high, it is interfering with the bar so I cannot rotate it down anymore. See photo...




After reading through this whole tread, I see that some mounted it to the cross bar under the wind fairing. (I believe this is how it was intended to be installed). Anyway, I see both options and am looking for some feedback on how I should mount mine. @CaliRaisedLed

 

Hello, Looks like you are using a prinsu mount therefore I cannot offer you a solution. We make a mount for the prinsu rack that will fix the problem you are having. You can check it out below. Please let us know if you have any other questions! https://caliraisedled.com/products/...mounting-brackets?_pos=5&_sid=2f5965b71&_ss=r

 

40" CUT-OUT PRINSU ROOF RACK SLIM LED LIGHT BAR BRACKET KIT

These brackets are proudly engineered and manufactured in the USA. The slim, low-profile design ensures wind noise and vibrations are kept to a minimum. These custom laser cut brackets will hold our Cali Raised LED 42” slim light bar on the Prinsu Roof Rack. The installation is super easy as shown in the video below
Product:https://caliraisedled.com/products/40-cut-out-prinsu-roof-rack-slim-led-light-bar-bracket-kit