What Have You Done To Your 3rd Gen Today?

Or don’t bother, because it’s dumb.

 

I thought it was a riot.

 

It alright. I just hate wine. I have had all types good and bad and still can’t figure out why people like rotten grape juice so much.

 

~14% ABV

 

I can't figure out why people drink bud light....

 

Solvent clean the dip stick, then give one side a VERY LIGHT spritz of flat black spray paint. Let dry WELL! Oil level is easy to see after.

 

I had the same issues with those sliders as well. I just cut the bolt down so it sat flush. And put thread locket and all the bolts. As for the brake lines. I just bent them by hand. You just need to be careful that you don’t kink them. I rerouted them over the bolt

 

Make sure your aftermarket fogs don't "disappear ".

 

To chase wild turkey 101? Because white claws are stupid?
It’s safer than the water?

 

What I did was scuff up the bottom of the dip stick with a strip of machinist lion’s tongue and made it much easier to read. Also the only way I have found to get an accurate reading is to check my oil first thing in the morning after setting all night. Just pull out the dip stick and read it. Don’t wipe it and stab it again. All you did then was rake oil up the dip stick tube and it just gets smeared all over the dip stick.

 

I'd drive my own truck until the bumper came in that way you don't have to drive around such a lame vehicle and when the bumper is in stock bring the truck back

 

So the gas treatment did a good job or is it just an additive to give you better gas mileage?

 

What exact grill did you get? I’m looking for one just like that with the same camera mount.

Also I’ve been thinking about removing the front seat bar as well. I think it bangs on my TRD Pro skid plate at times and I have stiffer springs up front anyway. Have you mad any sudden high speed turns, like emergency type stuff? That’s my only worry. How did it handle if so?

 

Nice Job ! Where did you buy the tailgate lock?

 

Thats the kind of stuff we need to see more of! Looks good.

 

Yes, nFab, was not easy to get one since they are technically "out of business" or bought by some other company but the part itself is good stuff. Fits my needs.

 

Mounted my Maxtrax and Roam 83L on my Prinsu roof rack a couple of days ago.
Currently having breakfast while my local shop, PTAP, is installing my new suspension. 2 inch lift Fox 2.5 coil-over.

 

Added ADS race coilovers. Removed sway bar

 

In NC the saying is 'it's turned'. Not a big wine person either.

 

It makes women crazy, give women wine and after a few drinks she wont remember nothing, my wife had half a bottle and she told me i should buy more accessories for my truck.... LOL....